Czech Nanotechnology Eliminates Greenhouse Gas Emissions in Budapest

18/09/2019 23:32

(source: https://www.mzv.cz/budapest/en/economy_and_trade/czech_nanotechnology_eliminates.html)

 

On September 5, 2019, in the presence of the Prime Minister of the Czech Republic, Andrej Babis, the Embassy of the Czech Republic in Budapest introduced its “Nanowall", which thanks to the photocatalytic coating FN Nano made by Czech company Advanced Materials JTJ (amjtj.com) decomposes car emissions, including greenhouse gases.

This technology aligns perfectly with the motto “The Czech Republic: The Country For The Future” because it not only improves the air quality in the Hungarian capital, but also mitigates the impacts of the climate change. At the same time, the FN Nano photocatalytic coating decomposes all organic impurities, which will keep the Embassy’s granite facade clean for the next decade.

 

The Czech Embassy’s “Nanowall” was introduced during the meeting of Mayors of Czech and Hungarian sister cities organized by CzechTrade at the Czech Embassy in Budapest in cooperation with the Embassies of Hungary in Prague and the Zlín Region.

 

The Embassy used this opportunity to support the Czech Nanotechnology Association and other Czech companies by setting up one-on-one meetings with Hungarian partners. For example, Advanced Materials JTJ, National Winner for the Czech Republic in the Innovation Category in the European Business Awards 2019 Award, had an opportunity to present its ecological photocatalytic coatings to representatives of the Hungarian Road and Motorway Directorate (offering air purification as well as surface protection to roadway noise barriers) and to a technical expert from the Hungarian Parliament (offering the same advanced protection to neo-gothic buildings on the bank of the Danube river).

In addition, Embassy’s representatives arranged for presentations of FN Nano coatings at the newly built testing ground for autonomous vehicles in Zalaegerszeg (Zalazone) near the border with Slovenia, as well as at the Formula 1 race track in Mogyoród (Hungaroring) Northeast of Budapest, the Budapest Technical University and the Hungarian Ministry of Innovation and Technology.

According to AMJTJ director Jan Prochazka, protective & self-cleaning FN NANO® coatings represent an opportunity for both Budapest and Hungary to effectively protect their respective rich cultural heritage,  showcase state of art technology projects and to reduce its high car emissions and greenhouse gas concentrations (https://www.levegominoseg.hu).

“I would like to thank Ambassador Tibor Bial, the Embassy's Economic Department and the Czechtrade Office in Budapest for the excellent organization as well as for the support of Czech companies. The Embassy in Budapest is an illustrative example of respectable behavior in its host country, and we should all behave in this respectful way, because we all are here, on our planet, only for a short visit.

 

This is especially important today when there is a practical technology that can remove air pollutants without chemicals. According to the methodology of the J. Heyrovsky Institute of Physical Chemistry, at the Czech Academy of Science, fifteen square meters of FN Nano photocatalytic coating eliminate emissions compensating for the operation of one diesel car in Budapest. To put it simply, these days we only need a paintbrush to behave ecologically responsible.” says Jan Procházka.

 

News and Information

Czech leaders in nanotechnology again on the American continent

12/06/2019 00:00
Advanced Materials-JTJ Ltd. will join Czech Nano mission for a third appearance and take part in the largest TechConnectWorld / Nanotech 2019 nanotechnology fair in North America, which will be held in Boston this year. This is an opportunity for AMJTJ to establish new contacts and promote the...
Read more

Photocatalytic Surfaces Formed by FN® Coatings Effectively Clean the Air of Automobile Exhaust Gases—Even Two Years after Application

28/07/2016 13:56
Samples of the surface of anti-noise barriers, which had served for two years as test surfaces for the multifunctional Protectam FN® coating, were taken for laboratory measurements of their effectiveness in cleaning the air of exhaust gas emissions from automobile traffic. Dangerous oxides of...
Read more

Test Wall Set Up by Advanced Materials-JTJ in Prague’s Barrandov District Proves to Have Exceptional Self-Cleaning Effectiveness Even After Two Years Under Harsh Conditions

27/07/2016 13:47
The wall is coated with the specialized Protectam FN® protective coating, which ensures effective, long-term protection against darkening caused by deposits of dust and dirt particles floating in the atmosphere. The protective surface formed by the FN® coating also effectively limits the growth of...
Read more

We Participated the China Beijing International Fair for Trade in Services (CIFTIS)

03/06/2016 13:23
With the support of the Ministry of Foreign Affairs of the Czech Republic and its Chinese business partner, the YunKe Environmental Protection Technology Co. Ltd., Advanced Materials-JTJ participated in China’s largest trade fair for services, the China Beijing International Fair for Trade in...
Read more

We Participated in “Nano-day” in Prague

29/05/2016 13:20
On 28 May 2016, Together with other nanotechnology firms, we participated in “Nano-day” in Prague.  We presented our highly efficient multifunctional coatings, Protectam FN®, as well as our progress in development of a new kind of lithium battery, on which our company and its related company...
Read more

Conversation with Jan Procházka about the HE3DA battery on Aktuálně.TV

06/04/2016 13:15
Our battery is a revolution in energy storage, we are cheaper than Elon Musk’s, says Czech inventor “We are developing a technology that will ensure safety in the delivery of energy, which is absolutely essential for the energy industry,” says the inventor of this revolutionary battery, Jan...
Read more

Secondary school students of the natural sciences at the Commercial Academy, the Technical School for Health and the Vocational School for Services in Jihlava, Czech Republic are preparing a thesis on photocatalytic nano-coatings and have produced a video

18/03/2016 13:10
Michael Hanko a Radim Makovička , two students in their final year of study of the natural sciences at the Commercial Academy, the Technical School for Health and the Vocational School for Services in Jihlava, Czech Republic, have prepared a thesis on their tests of the antibacterial effects of...
Read more

We participated in Nano-day in Brno

17/03/2016 13:06
Under the aegis of the Governor of the South Moravia Region, Michal Hašek, The Association of the Nanotechnology Industry of the Czech Republic organized its second “Nano-day,” a presentation to the public of nanotechnological products developed and produced by Czech firms.  The event took...
Read more

Advanced Materials-JTJ participated in a trade mission to Bavaria led by Czech Prime Minster Bohuslav Sobotka

14/03/2016 13:02
On 10-11 March 2016, the Director of Advanced Materials-JTJ, Ing. Jan Procházka, Ph.D., participated in a trade mission led by the Prime Minister of the Czech Republic, Bohuslav Sobotka, to Bavaria.  PM Sobotka was accompanied on the mission by Pavel Bělobrádek, Vice-premier for Science,...
Read more

The CZECH IS NANO in Austria: The Austria-Czech Nanotechnology Forum will be held April 20th 2016 in Vienna

19/02/2016 08:50
Advanced Materials-JTJ will participate, along with other Czech nano technology companies, Austria-Czech nanotechnology forum, which will take place April 20th 2016 in the seat of the Austrian Chamber of Commerce in Vienna. The event is organized by the Austrian Chamber of Commerce in...
Read more
<< 1 | 2 | 3 | 4 | 5 >>